DITCH ASSIST LITE (Lite mode only)

Appears directly below MODE, when Mode is set to Ditch Assist Lite.

Activated receivers — one row per Emlid Reach you have activated on this tablet: receiver type, the last 4 characters of its serial number (a MAC-identified receiver shows …MAC), and the activation date. Reads None yet until the first activation. Remove on a row asks Remove this receiver? and then forgets its unlock code — the receiver stops earning live guidance until the code is entered again.

Activate a receiver — opens the Activate Ditch Assist Lite screen: connect to the Reach, scan the QR code to email the request code, enter the 10-digit unlock code. See Ditch Assist Lite → Activating a receiver.

Setup guide — the three-step Set up your Reach card: position output on the Reach, Wi-Fi on the tablet, and where to tap in the app.